LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> 1-2 Accumulator Disassemble

1-2 Accumulator Disassemble

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using Air To Clean Accumulator Housing
    GM1755945Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Some models may not use an outer 1-2 accumulator spring (54).
  1. Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
  2. Remove the 1-2 inner (104) and outer (54) accumulator springs.
scientia non olet · About LEMON Manuals