LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Steering Wheel & Steering Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, press and release the heated steering wheel switch, located on the left side of the steering wheel. Observe that the heated steering wheel indicator illuminates.
  2. Press and release the heated steering wheel switch again. Observe that the indicator turns OFF.
scientia non olet · About LEMON Manuals