LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Instrument Panel System Displays & Gages) >> Diagnostic Information and Procedures >> Instrument Cluster Inoperative >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Voltage is supplied to the instrument panel cluster (IPC) through the battery voltage circuit and the RUN/CRANK relay voltage circuit. The IPC will operate when the RUN/CRANK relay voltage circuit is commanded on in the RUN/START position.

scientia non olet · About LEMON Manuals