Instrument Cluster Description and Operation: Odometer

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle odometer is calculated and stored electronically in the IPC. The IPC contains a season odometer and trip odometer A or B. Momentarily press the DIC trip/fuel button on the IPC in order to toggle between the season odometer and the trip odometer. Press the DIC set/reset button for greater than 0.25 seconds, while the trip odometer is displayed, in order to reset the trip odometer. The IPC displays the vehicle mileage and trip mileage as determined by the IPC. The IPC calculates the mileage based on the serial data vehicle speed information from the ECM. The odometer will display "error" if an internal IPC memory failure is detected. The odometer displays either miles or kilometers and can be set through the personalization programming menu in the DIC.