LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Sealing Washer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Good And Bad Sealing Washer Positions
    GM818438Courtesy of GENERAL MOTORS CORP.
  1. Remove the seal washer from the A/C refrigerant component.
    2. IMPORTANT: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  2. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    4. IMPORTANT: DO NOT reuse sealing washer.
  4. Discard the sealing washer.
scientia non olet · About LEMON Manuals