LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Rear Floor Air Outlet Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement (Non-HP2)  or HVAC Module Assembly Replacement (HP2) .
  2. Roll the carpeting back to expose the rear floor air ducts.
  3. Fig 1: View Of Rear Floor Ducts At Floor Studs
    GM363114Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear floor ducts from the floor studs.
  5. Fig 2: View Of Rear Floor Duct
    GM363016Courtesy of GENERAL MOTORS CORP.
  6. Remove the rear floor duct.