LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Compressor Mounting Bracket Replacement (Non HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG)  or Air Conditioning Compressor Replacement (HP2) .
  2. Remove the A/C belt tensioner bolts.
  3. Remove the A/C belt tensioner.
    4. Fig 1: A/C Compressor Bracket Mounting Bolts
    GM363185Courtesy of GENERAL MOTORS CORP.
  4. Remove the A/C compressor bracket mounting bolts.
  5. Remove the A/C compressor bracket.
scientia non olet · About LEMON Manuals