LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Parking Brake System) >> Repair Instructions >> Parking Brake Cable Adjuster Enabling

Parking Brake Cable Adjuster Enabling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the park brake pedal in the FULL upward position.
    2. Fig 1: Identifying Screwdriver, Pedal Drum & Pedal Assembly
    GM913328Courtesy of GENERAL MOTORS CORP.
  2. Pull rearward on the front park brake cable until the tension is released from the tool (1) installed in the pedal assembly.
  3. Remove the tool (1).
  4. Slowly release the park brake cable until it returns to its original position.
  5. Release the park brake pedal.
  6. Lower the vehicle.
  7. Apply and release the park brake pedal 3 times.
scientia non olet · About LEMON Manuals