LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Sunroof System) >> Repair Instructions >> Sunroof Housing Front Drain Hose Replacement

Sunroof Housing Front Drain Hose Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Sunroof Front Drain Hose, Grommet & Retainers
GM1685762Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Lower the front section of the headliner, as needed. Refer to Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CJ3) or Headlining Trim Panel Replacement (LWB w/CF5 w/o U42) or Headlining Trim Panel Replacement (LWB w/CF5 and U42) or Headlining Trim Panel Replacement (SWB w/U42 w/o CF5) or Headlining Trim Panel Replacement (SWB w/CF5 w/oU42) or Headlining Trim Panel Replacement (SWB w/CJ3) or Headlining Trim Panel Replacement (LWB w/U42 w/o CF5) or Headlining Trim Panel Replacement (SWB w/o CF5 and U42) or Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/U42 w/o CF5) or Headlining Trim Panel Replacement (Avalanche w/CJ2 w/o CF5 and U42) or Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CF5 w/o U42) or Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CF5 and U42) or Headlining Trim Panel Replacement (LWB w/CJ3) or Headlining Trim Panel Replacement (SWB w/CF5 and U42) or Headlining Trim Panel Replacement (LWB w/CJ2) .
1 Sunroof Clip Front Retainers (Qty: 3)
Tip:  Remove the retainer clips from the side of the A pillar.
2 Sunroof Hose Drain Front Grommet
Tip:  Use care when remove the drain hose grommet end from the cowl panel. The grommet presses in and pulls out of the cowl panel.
3 Sunroof Drain Front Hose
Tip:  Disconnect the drain hose from the module by pulling rearward.