LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Hybrid Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0C32 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Hybrid Batt. Inlet Air Temperature

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Accessory voltage is 9-18 volts, vehicle power mode is RUN
Parameter Normal Range:  26°C (79°F)
Hybrid Battery Inlet Air Temperature 5 volt Reference Circuit 100°C (212°F) -40°C (-40°F) -
Hybrid Batt Inlet Air Temperature Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Accessory voltage is 9-18 volts, vehicle power mode is RUN
Parameter Normal Range:  3.2 Volts
Hybrid Batt Inlet Air Temperature 5 volt Reference Circuit 0 volts 4.75 volts 5 volts
Hybrid Batt Mod Temperature 1-4

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Accessory voltage is 9-18 volts, vehicle power mode is RUN
Parameter Normal Range:  26°C (79°F)
Hybrid Batt Mod Temperature 1-4 5 volt Reference Circuit 100°C (212°F) -40°C (-40°F) -