Circuit/System Description

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

The drive motor generator battery control module is also referred to as the battery energy control module (BECM). The BECM will diagnose its own systems and determine when a fault condition is present. Diagnostics and system status is communicated from the BECM to the hybrid powertrain control module (HPCM) through the Hybrid LAN communication circuit. The HPCM is the host controller for diagnostic trouble code (DTC) information.

The BECM measures the internal hybrid battery resistance across the high voltage (HV) battery string and in pairs. This measurement is then compared to temperature. If the internal resistance values are out of range at a given battery temperature, this DTC will set. Higher internal resistance will also increase battery temperature.