LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transfer Case - BW 4484) >> Diagnostic Information and Procedures >> Transfer Case Whine or Rumble Noise

Transfer Case Whine or Rumble Noise

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Transfer Case Whine or Rumble Noise

Cause Correction
DEFINITION: A faulty internal transfer case component that causes a whine noise in the transfer case.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Faulty bearings
  1. Inspect all of the bearings and journals. Refer to Cleaning and Inspection .
  2. Replace any faulty bearings and any components with faulty bearing journals. Refer to Transfer Case Disassemble  and Transfer Case Assemble .