Instrument Panel Carrier Support Replacement (Except Cadillac)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the instrument panel carrier assembly. Refer to Instrument Panel Carrier Replacement (Except Cadillac) . |
|
| 1 | Instrument Panel Carrier Assembly Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | Instrument Panel Carrier Assembly Bolt (Qty: 6) Tighten: 22 N.m (16 lb ft) |
| 3 | Instrument Panel Carrier Assembly Lower Bolt Tighten: 22 N.m (16 lb ft) |
| 4 | Instrument Panel Carrier Support Assembly |