LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Headlamp Switch Bezel Replacement (Except Cadillac)

Headlamp Switch Bezel Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Headlamp Switch Bezel
GM1996468Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Headlamp Switch Plate Assembly

Procedure

  1. Use a flat bladed plastic trim tool in order to remove the trim plate from the instrument panel.
  2. Disconnect the electrical connections.
  3. When replacing the headlamp switch plate assembly, transfer all necessary components.