Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Floor Console Cup Holder

Courtesy of GENERAL MOTORS CORP.

Open the cupholder assembly.
Remove the screws securing the door to the cupholder.

Fig 2: View Of Front Floor Console Cup Holder Door

Courtesy of GENERAL MOTORS CORP.

Remove the door from the cupholder assembly.

Fig 3: Inserting A Flat Bladed Tool Between Console Assembly And Cupholder

Courtesy of GENERAL MOTORS CORP.

Insert a flat bladed tool between the console assembly and the cupholder and release the retaining tab.

Fig 4: Identifying Front Floor Console & Cup Holder Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the cupholder from the console assembly.