Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Floor Console & Cup Holder Assembly

Courtesy of GENERAL MOTORS CORP.

Install the cupholder into the console assembly.

Fig 2: View Of Front Floor Console Cup Holder Door

Courtesy of GENERAL MOTORS CORP.

Position the door to the cupholder assembly.

Fig 3: View Of Front Floor Console Cup Holder

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the screws securing the cupholder door to the cupholder assembly.
Tighten: Tighten the screws to 2 N.m (18 lb in).