LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Latch Replacement (Split Bench)

Rear Seat Latch Replacement (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Latch (Split Bench)
GM1708131Courtesy of GENERAL MOTORS CORP.
Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Rear Seat Latch Cover Bolt (Qty: 4)

Tighten:  2 N.m (18 lb in)

2 Rear Seat Latch Cover
3 Rear Seat Latch Center Cover Bolt

Tighten:  2 N.m (18 lb in)

4 Rear Seat Latch Center Cover
5 Rear Seat Latch Bolts (Qty: 4)

Tighten:  9 N.m (80 lb in)

6 Rear Seat Latch