Front Seat Head Restraint Guide Replacement (without HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Head Restraint Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Back Cushion Filler Panel Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement (with HP2) or Driver or Passenger Seat Back Cushion Finish Panel Replacement (without HP2) .
2	Front Seat Head Restraint Procedure Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3	Front Seat Head Restraint Guide (Qty: 2) Procedure: Squeeze the bottom of the guide together and push up to remove from the seat back.

Callout

Component Name

Front Seat Back Cushion Filler Panel
Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement (with HP2) or Driver or Passenger Seat Back Cushion Finish Panel Replacement (without HP2) .

Front Seat Head Restraint

Procedure

Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.

Front Seat Head Restraint Guide (Qty: 2)
Procedure:
Squeeze the bottom of the guide together and push up to remove from the seat back.