Front Seat Head Restraint Guide Replacement (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Head Restraint Guide & Components (With HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat back filler panel. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement (with HP2) or Driver or Passenger Seat Back Cushion Finish Panel Replacement (without HP2) .
1	Front Seat Head Restraint Assembly Procedure: Depress the buttons on the head restraint guides to raise and remove the head restraint.
2	Front Seat Head Restraint Guide (Qty: 2) Procedure Squeeze the tabs on the sides of the guide together and push up to remove from the seat back. Note the location and orientation of each guide for installation purposes.

Callout

Component Name

Preliminary Procedure:
Remove the front seat back filler panel. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement (with HP2) or Driver or Passenger Seat Back Cushion Finish Panel Replacement (without HP2) .

Front Seat Head Restraint Assembly
Procedure:
Depress the buttons on the head restraint guides to raise and remove the head restraint.

Front Seat Head Restraint Guide (Qty: 2)

Procedure

Squeeze the tabs on the sides of the guide together and push up to remove from the seat back.
Note the location and orientation of each guide for installation purposes.