LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Inner Recliner Finish Cover Replacement

Driver or Passenger Seat Inner Recliner Finish Cover Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Driver Or Passenger Seat Inner Recliner Finish Cover Components
GM1986116Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front seat. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (with HP2)  or Front Seat Back Cushion Cover and Cushion Pad Replacement (without HP2) .
  2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2)  or Seat Cushion Trim Cover and Pad Replacement (without HP2) .
1 Front Seat Recliner Finish Cover Screw
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)
2 Front Seat Recliner Finish Cover
scientia non olet · About LEMON Manuals