LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Interior Trim And Paneling) >> Repair Instructions >> Rear Door Upper Garnish Molding Replacement

Rear Door Upper Garnish Molding Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Back Body Opening Garnish Molding Assembly & Clips
GM1657645Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Back Body Opening Garnish Molding Assembly
Tip:  Pull down to disengage retainer clips.
2 Back Body Opening Garnish Molding Assembly Clip (Qty: 7)