LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Interior Trim And Paneling) >> Repair Instructions >> Midgate Hinge Finish Cover Replacement (SUT)

Midgate Hinge Finish Cover Replacement (SUT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Midgate Hinge Finish Cover & Clips
GM1709267Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Midgate Hinge Finish Cover
Tip: 
  1. Tilt rear seat backs forward in order to gain access to hinge cover.
  2. Pull upward on hinge cover to disengage clips.
2 Midgate Hinge Finish Cover Clip (Qty: 2)