LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Interior Trim And Paneling) >> Repair Instructions >> Body Hinge Pillar Trim Panel Replacement

Body Hinge Pillar Trim Panel Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Hinge Pillar Trim Panel Assembly & Retainers
GM1657792Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedures: 
Remove front door sill trim panel. Refer to Front Side Door Sill Plate Replacement .
1 Front Hinge Pillar Trim Panel Assembly
Tip:  The hood release handle must be in the open position for installation of the LH hinge pillar panel.
2 Front Hinge Pillar Trim Panel Assembly Retainer (Qty: 2)