LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Fascia Skid Plate (Z71)

Front Bumper Fascia Skid Plate (Z71)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Bumper Skid Plate & Screws
GM1714798Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the front fascia. Refer to Front Bumper Lower Fascia Replacement (Z71) .
1 Front Bumper Skid Plate Screws (Qty: 8)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Front Bumper Skid Plate