LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Conduit Replacement

Rear Side Door Conduit Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Door Conduit Grommet & Electrical Connectors
GM1674908Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Electrical Connectors

Procedure

  1. Mark the location and the color of the wires to the electrical socket before removing the wires.
  2. Disconnect the door wiring harness electrical connector from the body harness.
  3. Remove the wiring harness wiring one at a time from the conduit.
  4. Remove the wiring harness from the rubber conduit.
2 Rear Door Conduit Grommet