Liftgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Lift Gate Weatherstrip

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .
1	Liftgate Weatherstrip Tip: Locate the paint dot on the upper portion of the weatherstrip directly below the electrical pass through. Roll the weatherstrip from the center to the upper corners. Roll the weather strip from the upper corners to the lower corners. Roll the weatherstrip from the lower corners to the center.