LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Strut Replacement

Hood Strut Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Hood Strut & Retainers
GM1674992Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
1 Hood Strut Retainer (Qty: 2)

Procedure

  1. Release the locking tabs on the strut.
  2. Ensure the clip is fully seared when rod is reinstalled. If the clip cannot be fully seated a new rod should be installed.
2 Hood Strut