Front Side Door Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Side Door

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
1	Front Side Door Check Link Bolt NOTE: Refer to Fastener Notice . Tighten: 20 N.m (15 lb ft)
2	Front Side Door Upper Hinge Bolt (Qty: 2) Procedure Remove the water deflector. Support the door before removing the hinge bolts. Disconnect the electrical connector. With the aid of an assistant, remove the door. Tighten: 18 N.m (24 lb ft)
3	Front Side Door Lower Hinge Bolt (Qty: 2) Tighten: 18 N.m (24 lb ft)
4	Front Side Door Assembly Procedure When replacing the door it is necessary to transfer all of the internal components. Apply LOCTITE® Blue GM P/N 12345382, or (Canadian P/N 10953489), or equivalent to the fastener prior to installation.