LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Bulb Replacement (Escalade)

Park/Turn Signal Lamp Bulb Replacement (Escalade)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Turn Signal Lamp Bulb & Socket
GM1767117Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front lower bumper filler from the side the bulb is being serviced from. Refer to Front Bumper Filler Replacement (Z71) or Front Bumper Filler Replacement (All Utility, Avalanche, Cadillac EXT) .
  2. Rotate the bulb socket counterclockwise in order to remove.
1 Front Park, Turn Signal Lamp Socket
2 Front Park, Turn Signal Lamp Bulb
Tip:  Pull the bulb straight from the socket.