High Mount Stop Lamp Replacement (GMC Yukon Two-mode Hybrid)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the liftgate upper applique. Refer to Liftgate Upper Applique Replacement (GMC Yukon Two-mode Hybrid) . |
|
| 1 | High Mount Stop Lamp Assembly Nut (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | High Mount Stop Lamp Assembly Tip: Ensure the high mount stop lamp electrical harness is routed and secured to the back body opening upper applique tabs as removed. |
| 3 | High Mounted Stop Lamp Assembly Tip: There are no serviceable bulbs in the lamp which uses the (LED) light emitting diode for lumination. |