Windshield Washer Hose Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Windshield Washer Pump Hose Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Open the hood. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side . Disconnect the washer hose from the washer pump spout.
1	Windshield Washer Hose Retainer Clip
2	Windshield Washer Nozzle Hose Tip: Disconnect the hose at the left rear fender flange.
3	Windshield Washer Pump Hose Assembly Tip: Route the new hose in the same location as the old hose was removed from.