LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (HVAC - Automatic) >> Repair Instructions >> HVAC Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: HVAC Control Module & I/P Panel
    GM810847Courtesy of GENERAL MOTORS CORP.
  1. Remove the center instrument panel (I/P) trim bezel. Refer to Instrument Panel Center Trim Panel Replacement .
  2. Remove the screws from the HVAC control module (2).
  3. Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the I/P (4).
  4. Reposition the HVAC control module (2) from the I/P panel (1).
  5. Disconnect the electrical connectors from the HVAC control module (2).
scientia non olet · About LEMON Manuals