LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (HVAC - Automatic) >> Repair Instructions >> Air Temperature Actuator Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement .
  2. Fig 1: View Of Heater Core Cover & HVAC Module Assembly
    GM826718Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (4) from the right air temperature actuator (3).
  4. Remove the screws from the right air temperature actuator (3).
  5. Remove the right air temperature actuator (3) from the HVAC module assembly (2).