LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Exterior Trim) >> Repair Instructions >> Endgate Assist Handle Replacement (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Endgate Assist Handle & Retaining Bolts
    GM1708947Courtesy of GENERAL MOTORS CORP.
  1. Install the assist handle (2) to the endgate cap.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts (1) to the assist handle in order to attach the assist handle to the endgate cap.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Close the cargo box stowage lid.
scientia non olet · About LEMON Manuals