LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cellular, Entertainment, And Navigation) >> Repair Instructions >> Speaker Replacement - Front Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Windshield Pillar Speaker
    GM758477Courtesy of GENERAL MOTORS CORP.
  1. Press in the speaker (1) until it is fully seated.
  2. Connect the electrical connector (3).
  3. Install the windshield garnish molding (2). Refer to Windshield Pillar Garnish Molding Replacement .
scientia non olet · About LEMON Manuals