Removal Procedure
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (I/P) top pad. Refer to Instrument Panel Upper Trim Pad Replacement .
- Remove the radio. Refer to Radio Replacement .
- Remove the GPS cable from the I/P structure.
- Remove the GPS antenna screw (1).
- Slide the GPS antenna (2) toward the passenger side of vehicle to remove the antenna from the I/P structure.
- Remove the GPS antenna (2) from the vehicle.
IMPORTANT:
Observe the routing of the global positioning system (GPS) antenna cable to ensure the GPS antenna cable is routed properly during installation.