LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Wiring Systems And Power Management - Diagnostic Starting Point And In-Line Harness Connector End Views) >> Inline Harness Connectors >> C110 Engine Harness to Front Axle Harness (NP8) Connector

C110 Engine Harness to Front Axle Harness (NP8) Connector

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
C110 Engine Harness to Front Axle Harness (NP8) Connector End View

GM324841Courtesy of GENERAL MOTORS CORP.
GM396241Courtesy of GENERAL MOTORS CORP.
C110 Engine Harness to Front Axle Harness (NP8) Connector Parts Information

Connector Part Information 
  • OEM: 12162144
  • Service: 12102741
  • Description: 4-Way F Metri-Pack 150 Series, Sealed (BK)
Connector Part Information 
  • OEM: 12162102
  • Service: 15305839
  • Description: 4-Way M Metri-Pack 150 Series, Sealed (BK)
Terminal Part Information 
  • Terminal:TBD
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
Terminal Part Information 
  • Terminal:12045773/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-3 (GY)
C110 Engine Harness to Front Axle Harness (NP8) Connector Terminal Identification

Pin Wire Color Circuit No. Function Pin Wire Color Circuit No. Function
A TN/WH - Axle Switch Signal A TN/WH 1695 Axle Switch Signal
B GY/BK - Front Axle Actuator Control B GY/BK 1570 Front Axle Actuator Control
C BN - Ignition 3 Voltage C BN 241 Ignition 3 Voltage
D BK - Ground D BK 550 Ground