LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Rear Suspension System) >> Repair Instructions >> Shock Absorber Replacement (2500 Series)

Shock Absorber Replacement (2500 Series)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Shock Absorber, Nuts & Bolts
GM1761248Courtesy of GENERAL MOTORS CORP.
Shock Absorber Replacement (2500 Series)

Callout Component Name
Preliminary Procedure: 
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle .
1 Shock Absorber Bolt (Qty: 2)
2 Shock Absorber Nut (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  95 N.m (70 lb ft)

3 Shock Absorber