LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Automatic Transmission - 6L50/6L80/6L90 - Service, Diagnosis & Troubleshooting) >> Harsh, Soft, Delayed or Slipping Third, Fifth, or Reverse Gear

Harsh, Soft, Delayed or Slipping Third, Fifth, or Reverse Gear

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Harsh, Soft, Delayed or Slipping Third, Fifth, or Reverse Gear

Checks Causes
1-2-3-4 and 3-5-R Clutch Assembly (51)
  • Inspect for damaged or worn 3-5-R clutch plates (402-404).
  • Inspect for damaged 3-5-R clutch piston (421), apply ring (405), and spring (420).
  • Inspect for cut, worn, or damaged 3-5-R clutch piston dam O-ring seal (418), inner seal (419), and outer seal (422).
  • Inspect for improper selective 3-5-R clutch backing plate retaining ring (400).
  • Inspect for damaged 3-5-R clutch backing plate (401). Inspect for worn splines on the backing plate.