LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Exhaust Manifold Heat Shield & Bolts
    GM1708616Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plug wires. Refer to Spark Plug Replacement .
  2. Remove the exhaust manifold heat shield bolts and heat shield from the exhaust manifold.
scientia non olet · About LEMON Manuals