Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| IPC Gauges | - | The IPC drives all Gauges to the maximum physical position when you select On. The IPC drives all Gauges to the minimum physical position when you select Off. |
| Lamp Test | - | The IPC illuminates the following indicators when you select On:
The indicators should illuminate until commanded Off. |
| PRNDL Display | - | An underscore illuminates under each indicator in the PRNDL display until commanded Off. |
| Segments Test | - | All DIC and Odometer segments illuminate until commanded Off. |