Instrument Cluster Description and Operation: Speedometer
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
The IPC displays the vehicle speed on the analog speedometer based on the vehicle speed signal from the PCM. The PCM converts the data from the vehicle speed sensor to a 4,000 pulses/mile signal. The IPC uses the vehicle speed signal circuit from the PCM in order to calculate the vehicle speed.
The speedometer defaults to 0 km/h (0 mph) if a malfunction in the vehicle speed signal circuit exists.