Vehicle Information: Timer
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
The Timer is displayed as XX (hours) : XX (minutes) : XX (seconds).
The Timer is started and stopped using the DIC Select button.
Holding the Select button for longer than 1 second while the Timer parameter is displayed will reset the Timer to 00:00:00.
The Timer status and data value is retained in memory when the ignition is turned OFF. When the ignition is turned ON again, the Timer status and data value is resumed.
The Timer maximum value is 99:59:59. When the maximum is reached, the Timer rolls over to 00:00:00 and continues to operate.