LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Transmission - 6L50/6L80/6L90 - DTC P0989 To DTC P2764) >> DTC P2723 or P2724 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the Transmission Fluid Checking .
  2. Turn ON the ignition, with the engine OFF.
  3. IMPORTANT: Before clearing the DTC, use the scan tool in order to record the Freeze Frame and Failure Records.
  4. Record the DTC Freeze Frame and Failure Records.
  5. Clear the DTC.
  6. Operate the vehicle in drive with the calculated throttle position greater than 15 percent to obtain 72 km/h (45 mph) and achieve 5th gear. Perform this maneuver 2 times.
    • If the DTC resets, go to Circuit/System Testing.