LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Transmission - 6L50/6L80/6L90 - DTC P0989 To DTC P2764) >> DTC P1684, P1685 or P1686 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clear the DTC and operate the vehicle under the condition for running and setting the DTC.
  2. Shut the ignition OFF for 30 seconds, and verify that the DTC does not reset.
    • If the DTC resets, replace the control solenoid (w/body and TCM) valve assembly.