LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Steering Wheel And Column) >> Repair Instructions >> Steering Column Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Steering Shaft
    GM667564Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Remove the steering shaft (1) from the steering column tilt head assembly.
  4. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection .
scientia non olet · About LEMON Manuals