LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Steering Wheel And Column) >> Repair Instructions >> Steering Column Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Steering Shaft
    GM667564Courtesy of GENERAL MOTORS CORP.
  1. Install the steering shaft (1) into the steering column tilt head assembly.
  2. Install the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals