Clutch Backing Plate Retaining Ring Specifications (6L80)
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
3-5 Reverse Clutch
| Clutch Pack Travel Specification - 1.21-1.79 mm (0.048-0.070 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.61-1.71 mm | 0.063-0.067 in | Gray |
| 1.88-1.98 mm | 0.074-0.078 in | Light Green |
| 2.15-2.25 mm | 0.085-0.089 in | Yellow |
| 2.42-2.52 mm | 0.095-0.099 in | None |
| 2.69-2.79 mm | 0.106-0.110 in | Purple |
1-2-3-4 Clutch
| Clutch Pack Travel Specification - 1.53-1.99 mm (0.060-0.078 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 2.15-2.25 mm | 0.085-0.089 in | Yellow |
| 2.42-2.52 mm | 0.095-0.099 in | None |
| 2.69-2.79 mm | 0.106-0.110 in | Purple |
| 2.96-3.06 mm | 0.117-0.120 in | Light Blue |
| 3.23-3.33 mm | 0.127-0.131 in | Orange |
4-5-6 Clutch
| Clutch Pack Travel Specification - 1.28-1.89 mm (0.050-0.074 in) | ||
|---|---|---|
| Retaining Ring Thickness | O.D. Color | |
| Metric | English | |
|
IMPORTANT:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.60-1.70 mm | 0.063-0.067 in | Yellow |
| 2.02-2.12 mm | 0.080-0.083 in | None |
| 2.44-2.54 mm | 0.096-0.100 in | Purple |