Automatic Transmission Range Selector Lever Replacement

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Range Selector Cable Lever & Nut

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Disconnect the transmission range selector cable from the range selector cable lever ball stud.
1	Transmission Range Selector Cable Lever Nut NOTE: Refer to Fastener Notice . Tighten: 25 N.m (18 lb ft)
2	Transmission Range Selector Cable Lever

Callout

Component Name

Preliminary Procedures

Apply the park brake.
Shift the transmission into neutral.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the transmission range selector cable from the range selector cable lever ball stud.

Transmission Range Selector Cable Lever Nut

NOTE: Refer to Fastener Notice .

Tighten: 25 N.m (18 lb ft)

Transmission Range Selector Cable Lever