Manual Shift Shaft Seal Replacement

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manual Shift Shaft Seal Component View

Courtesy of GENERAL MOTORS CORP.

Callout	Component Procedure
1	Manual Shift Shaft Seal NOTE: Do not damage the case bore during removal of the manual shift shaft seal. NOTE: When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result. NOTE: Refer to Seal Reuse Notice . Special Tools DT 47770 Seal Installer. See Special Tools . J 45201 Cooler Line Seal Remover. See Special Tools .

Callout

Component Procedure

Manual Shift Shaft Seal

NOTE: Do not damage the case bore during removal of the manual shift shaft seal.

NOTE: When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

NOTE: Refer to Seal Reuse Notice .

Special Tools

DT 47770 Seal Installer. See Special Tools .
J 45201 Cooler Line Seal Remover. See Special Tools .